Summary:

Raw data for Goers et al, (2017), Biotech Bioeng. doi:10.1002/bit.26254.

Each graph including the supplementary figures is a separate tab.

Summary: The instrumental record reveals that tropical cyclone activity is sensitive to oceanic and atmospheric variability on inter-annual and decadal scales. However, our understanding of climate’s influence on tropical cyclone behavior is restricted by the short historical record and sparse prehistorical reconstructions, particularly in the western North Pacific where coastal communities suffer loss of life and livelihood from typhoons annually. Here we reconstruct three millennia of deep tropical North Pacific cyclogenesis and compare with other records to explore past regional typhoon dynamics. These records demonstrate low baseline activity prior to 1350 C.E. followed by a rapid culmination in activity during the Little Ice Age. This pattern is concurrent with hydroclimate proxy variability, suggesting a centennial-scale link between Pacific hydroclimate and tropical cyclone climatology. Using an ensemble of global climate models, we demonstrate that migration of the Pacific Walker circulation and variability in two Pacific climate modes during the Little Ice Age contributed to enhanced tropical cyclone activity in the tropical western North Pacific. Changes to Walker Circulation and expansion of the tropics projected for the next century invert Little Ice Age hydroclimate trends, potentially reducing typhoon activity in the deep tropical Pacific.

Summary: Database of oyster mortality based on body size treatment For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/804502

Summary: Carbonate chemistry and isotopes from nine M/S Columbus Waikato cruises between New Zealand and Long Beach, CA in the Pacific Basin from 2004-2006. This dataset includes dissolved inorganic carbon (DIC), and del13C-DIC. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/700907

Summary: The 13C/12C stable carbon isotopic ratio of the dissolved inorganic carbon from samples collected on the GEOTRACES EPZT cruise (R/V Thomas G. Thompson TN303) in the Eastern Tropical South Pacific from October to December 2013. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/676537

Summary: This dataset contains the sample log for HADESK bacterial biomarker phospholipid fatty acid (PLFA) content from sediment push cores. The same samples were also used for the organic matter (OM) analysis. Samples were taken in the Kermadec Trench in the Southwest Pacific, 4000 to ~10,000m from the RV/ Thomas G. Thompson during cruise TN309, May 2014. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/763873

Summary:

Dokumen ini adalah tugas akhir dari mahasiswa Prodi S1 Teknik Geologi ITB Satrio Wiavianto yang telah diwisuda ada Bulan Oktober 2016 yang lalu. Pemetaan dilakukan di wilayah gunungapi di Bandung Timur dengan penekanan pada studi petrologinya dengan sedikit analisis hidrogeologi. Revisi minor telah dilakukan pada versi ini. Peta resolusi tinggi akan segera ditambahkan.

Summary:

This is the dataset and code for the analysis of sickness behaviors in calves within corneal lesions (IBK or pinkeye). 

Summary:

This is an exciting release with lots of new features and improvements. For a sample of all the features please see our features page

• Loiter mode. Smoothly move your position while in position hold.
• RTH now has ascends to a safe altitude before returning home, hovers before landing
• Improved altitude estimation and altitude hold control. Ability to aggressively change altitude with exponential for smooth control too.
• Improved position hold performance
• Frksy telemetry support
• and lots of other improvements and bug fixes

Before testing Altitude Hold, make sure you understand what it does. Please read this page

For questions and discussions see the forums

Summary: d13C of Dissolved Inorganic Carbon (DIC) measured on bottle cast samples from Leg 2 (Hilo, HI to Papeete, French Polynesia) of the US GEOTRACES Pacific Meridional Transect (PMT) cruise (GP15, RR1815) on R/V Roger Revelle from October to November 2018 For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/869611

Summary: This dataset includes raw counts of meiofauna identified in push core samples taken in the Kermadec Trench in the Southwest Pacific, 4000 to ~10,000m from the RV/ Thomas G. Thompson during cruise TN309 (HADES-K), May 2014. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/763758

Summary: This dataset contains C and N isotope data for individual amino acids from fossil seals from the western Ross Sea, Antarctica. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/732078

Summary: Temperature data collected from loggers deployed at the Thalassia Experimental Network (TEN) sites in the Western Atlantic from 2018-2019. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/784623

Summary: Compound-specific nitrogen isotopes from sperm whale skin tissue from the UC-Santa Cruz labs of P. Koch and M. McCarthy. The sperm whale skin tissue came from the California Current System from 1972 to 2005. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/653061

Summary: This dataset includes location, weathering, bulk isotope, and 14C data for fossil seals from the western Ross Sea, Antarctica from from 2013-2014. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/732524

Summary: This dataset includes results of cluster analysis and gene ontology: carbonate Organic Matrix (COM) proteins from coral, mollusk, and sea urchin; analyzed in the Falkowski lab at Rutgers from 2010-2014. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/536485

Summary: The effects of Hurricane Harvey were studied. This dataset includes hydrographic measurements (temperature, salinity, oxygen, pH, refraction) from San Antonio Bay, northwest Gulf of Mexico estuaries along the Texas coast. They were taken during eleven quarterly sampling trips on a small boat, Feb. 2017 - July 2019. For a complete list of measurements, refer to the full dataset description in the supplemental file 'Dataset_description.pdf'. The most current version of this dataset is available at: https://www.bco-dmo.org/dataset/784614

Summary:

PyGMT is a library for processing geospatial and geophysical data and making publication quality maps and figures. It provides a Pythonic interface for the Generic Mapping Tools (GMT), a command-line program widely used in the Earth Sciences.

Summary:

This is a minor release that addresses issues in the v0.11 series and adds a small number of targeted enhancements. It is a recommended upgrade for all users.

• |Docs| A paper describing seaborn has been published in the Journal of Open Source Software <https://joss.theoj.org/papers/10.21105/joss.03021>_. The paper serves as an introduction to the library and can be used to cite seaborn if it has been integral to a scientific publication.

• |API| |Feature| In lmplot, added a new facet_kws parameter and deprecated the sharex, sharey, and legend_out parameters from the function signature; pass them in a facet_kws dictionary instead (https://github.com/mwaskom/seaborn/pull/2576).

• |Feature| Added a move_legend convenience function for repositioning the legend on an existing axes or figure, along with updating its properties. This function should be preferred over calling ax.legend with no legend data, which does not reliably work across seaborn plot types (https://github.com/mwaskom/seaborn/pull/2643).

• |Feature| In histplot, added stat="percent" as an option for normalization such that bar heights sum to 100 and stat="proportion" as an alias for the existing stat="probability" (https://github.com/mwaskom/seaborn/pull/2461, https://github.com/mwaskom/seaborn/pull/2634).

• |Feature| Added FacetGrid.refline and JointGrid.refline methods for plotting horizontal and/or vertical reference lines on every subplot in one step (https://github.com/mwaskom/seaborn/pull/2620).

• |Feature| In kdeplot, added a warn_singular parameter to silence the warning about data with zero variance (https://github.com/mwaskom/seaborn/pull/2566).

• |Enhancement| In histplot, improved performance with large datasets and many groupings/facets (https://github.com/mwaskom/seaborn/pull/2559, https://github.com/mwaskom/seaborn/pull/2570).

• |Enhancement| The FacetGrid, PairGrid, and JointGrid objects now reference the underlying matplotlib figure with a .figure attribute. The existing .fig attribute still exists but is discouraged and may eventually be deprecated. The effect is that you can now call obj.figure on the return value from any seaborn function to access the matplotlib object (https://github.com/mwaskom/seaborn/pull/2639).

• |Enhancement| In FacetGrid and functions that use it, visibility of the interior axis labels is now disabled, and exterior axis labels are no longer erased when adding additional layers. This produces the same results for plots made by seaborn functions, but it may produce different (better, in most cases) results for customized facet plots (https://github.com/mwaskom/seaborn/pull/2583).

• |Enhancement| In FacetGrid, PairGrid, and functions that use them, the matplotlib figure.autolayout parameter is disabled to avoid having the legend overlap the plot (https://github.com/mwaskom/seaborn/pull/2571).

• |Enhancement| The load_dataset helper now produces a more informative error when fed a dataframe, easing a common beginner mistake (https://github.com/mwaskom/seaborn/pull/2604).

• |Fix| |Enhancement| Improved robustness to missing data, including some additional support for the pd.NA type (https://github.com/mwaskom/seaborn/pull/2417, https://github.com/mwaskom/seaborn/pull/2435).

• |Fix| In ecdfplot and rugplot, fixed a bug where results were incorrect if the data axis had a log scale before plotting (https://github.com/mwaskom/seaborn/pull/2504).

• |Fix| In histplot, fixed a bug where using shrink with non-discrete bins shifted bar positions inaccurately (https://github.com/mwaskom/seaborn/pull/2477).

• |Fix| In displot, fixed a bug where common_norm=False was ignored when faceting was used without assigning hue (https://github.com/mwaskom/seaborn/pull/2468).

• |Fix| In histplot, fixed two bugs where automatically computed edge widths were too thick for log-scaled histograms and for categorical histograms on the y axis (https://github.com/mwaskom/seaborn/pull/2522).

• |Fix| In histplot and kdeplot, fixed a bug where the alpha parameter was ignored when fill=False (https://github.com/mwaskom/seaborn/pull/2460).

• |Fix| In histplot and kdeplot, fixed a bug where the multiple parameter was ignored when hue was provided as a vector without a name (https://github.com/mwaskom/seaborn/pull/2462).

• |Fix| In displot, the default alpha value now adjusts to a provided multiple parameter even when hue is not assigned (https://github.com/mwaskom/seaborn/pull/2462).

• |Fix| In displot, fixed a bug that caused faceted 2D histograms to error out with common_bins=False (https://github.com/mwaskom/seaborn/pull/2640).

• |Fix| In rugplot, fixed a bug that prevented the use of datetime data (https://github.com/mwaskom/seaborn/pull/2458).

• |Fix| In relplot and displot, fixed a bug where the dataframe attached to the returned FacetGrid object dropped columns that were not used in the plot (https://github.com/mwaskom/seaborn/pull/2623).

• |Fix| In relplot, fixed an error that would be raised when one of the column names in the dataframe shared a name with one of the plot variables (https://github.com/mwaskom/seaborn/pull/2581).

• |Fix| In the relational plots, fixed a bug where legend entries for the size semantic were incorrect when size_norm extrapolated beyond the range of the data (https://github.com/mwaskom/seaborn/pull/2580).

• |Fix| In lmplot and regplot, fixed a bug where the x axis was clamped to the data limits with truncate=True (https://github.com/mwaskom/seaborn/pull/2576).

• |Fix| In lmplot, fixed a bug where sharey=False did not always work as expected (https://github.com/mwaskom/seaborn/pull/2576).

• |Fix| In heatmap, fixed a bug where vertically-rotated y-axis tick labels would be misaligned with their rows (https://github.com/mwaskom/seaborn/pull/2574).

• |Fix| Fixed an issue that prevented Python from running in -OO mode while using seaborn (https://github.com/mwaskom/seaborn/pull/2473).

• |Docs| Improved the API documentation for theme-related functions (https://github.com/mwaskom/seaborn/pull/2573).

• |Docs| Added docstring pages for all methods on documented classes (https://github.com/mwaskom/seaborn/pull/2644).

Summary:

PyGMT is a library for processing geospatial and geophysical data and making publication quality maps and figures. It provides a Pythonic interface for the Generic Mapping Tools (GMT), a command-line program widely used in the Earth Sciences.